Description

"Type Vortex 1400/160 II, Table travel (right and level) X-axis: 4200mm, Column travel (back and forth) Y-axis: 1400mm, Spindle head travel (up and down); Z-axis: 610mm, Spindle head tilting travel (banck and forth) A-axis: +/- 40°, Spindle head tilting travel (right and left) B-xis: +/- 40°, Distance from the spindle end to the table top: min. 200mm-max. 810mm, Spindle head travel Z-axis: 610mm, Spindle taper hole: 7/24 taper No. 50, Spindle speed Standard: 50 - 10000 min-1, 5 Digit S code direct command for, 1 min-1, Spindle torque Standard (30 min): 117,7 Nm, Spindle motor: Type: AC inverter motor, Output: 30 min. rating: 37 kW, Cont. rating: 30kW, Table: External size of the table: 4000mm (right and left) x 1250mm (back and forth), T-slots : Nominal size (ISO R 299) 22mm, Number of slots: 9, Pitch: 140mm, Reference T slot: 22H8 mm, Max. table load capacity when equally distributed: 7000 kg, Automatic tool changer: Magzine capacity: 60 tools, Tool selection method: Automatic random and shortest access to the magazine pocket number, Tool shank: MAS-50 & CAT-50, Diameter of maximum tool: with adjacent tool: Ø 125mm, without adjacent tool: Ø 210mm, Tool's maximum mass incl. the tool shank and retention knob : 20 kg, Tool's maximum length from taper gage face: 380mm, Max. allowable moment of magazine & ATC arm gripper: 16 N m, Chip-to-chip time (MAS -011-1987): 9,8s, Tool-to-tool time: 1,5 s , Static accuracy (actually measured exp): Bidirectional positioning accuracy X-/Y-/Z- axis: 0,030/0,020/0,012mm, A-/B-axis: 14 s, Bidirectional positioning repeatbility X-/Y-/Z- axis: 0,018/0,010/0,007mm, A-/B-axis: 8 s, Machine size: Machine height from machine bottom Standard: 4058mm, Floor requirements: 11880 x4612mm, Machine mass: 37 000 kg, Power: AC Voltage: 200/220/230/460 V +/- 10%, Frequency: 50/60 Hz +/- 1%, Pneumatic: Pressure: 0,5 MPa or over, Capacity : Standard: 600L/min (ANR) or over - With cutting air-blaster and pallet changer: 1500L/min (ANR) or over
Noise value : Lwa :79dBA, Uncertain value: K : 4 dBA"

Prix

Non renseigné

Adresse

312 RUE DES FUSILLES
59493 Villeneuve d'Ascq

• Catégorie : Usinage
• Sous-catégorie : Fraisage
• Type : Centre d'usinage vertical

• Fabricant : Mazak
• Modèle :
• Année de fabrication : 2007
• État : Occasion